-
75º Gooseneck punch Configurable in .25" increments from 1" to 101.5" 1", 1.25", 1.5", 1.75", 2", 3", 4", 5", 12", 18", and 24" Lengths Included *Pictures show 53.5" set
-
- 60° gooseneck punch (5.75" net height, R.094" tip) with a 62° single-V die (7/8" opening, 1.75" net height)
- (2) 24" lengths and a(1) 53.5" segmented set, configurable in 0.25" increments
- American style safety tang
- Meant for use with our B96/150 Press Brake
-
- User friendly
- Continual system status checks
- Easily viewed message display
- Meets OSHA, UL, ANSI, CSA, RIA, and CE standards
- B48/100
-
- User friendly
- Continual system status checks
- Easily viewed message display
- Meets OSHA, UL, ANSI, CSA, RIA, and CE standards
- B72/100
- B96/150
-
Sliding on two chrome pins, this brake attachment is both heavy-duty and accurate. Fits the SPP40/75 and HP50. Also adaptable to HP100. (Not compatible with the SPP20/50)
-
This innovative add-on allows you to slide the cylinder side to side on your press. It uses a hydraulic cylinder with a valve control Travel: 12" Note: The product pictured is the 48" wide model
-
The 40/80 Hydraulic Ironworker is sold as a complete package that includes: Single-phase or three-phase availability 80 ton punch 40 ton press 14" Flat bar shear Angle shear 5 piece punch set A set of press blocks 3″ ram extension 20 ton Notcher station (notchers purchased separately). This package has everything you need to get started. You can customize your machine by adding additional accessories to your quote below.
-
The Iroquois 40/80 Production Ironworker is sold as a complete package that includes: Production Solenoid Control with foot pedal and limit switches Single-phase or three-phase availability 80 ton punch 40 ton press 14" Flat bar shear Angle shear 5 piece punch set A set of press blocks 3″ ram extension 20 ton Notcher station (notchers purchased separately). This package has everything you need to get started. You can customize your machine by adding additional accessories to your quote below.
-
48" of 4W2E 4-way die with die openings .625" @90deg, .875" @85deg, 1.25" @85deg, 2" @85deg. This die has a 2.36" (60mm) block and is designed for the 2.36" bolt on die holder.
-
48" of 4W5 with die openings of 1", 1.5", 2", 3". This die has a 3.75" block and is made to fit the 3.75" wide bolt on die holder.
-
2.36″ (60mm) bolt on die holder with American tang slot. Measurement is front to back width.
-
3.75" bolt on die holder with American tang slot. Measurement is front to back width.
-
This innovative add-on allows you to slide the cylinder side to side on your press. It uses a hydraulic cylinder with a valve control Travel: 18"
-
This innovative add-on allows you to slide the cylinder side to side on your press. It uses a hydraulic cylinder with a valve control Travel: 24" Note: The product pictured is the 48" wide model
-
48" Powered Backgauge for Manual Control.
This backgauge has it's own basic touchscreen control that operates independantly from the press brake control.Simple to use.
Enter the desired position and the backgauge moves to that position under power and remains there until a new position has been entered. May be installed on machines with a Manual Control or CNC Control. Additionally, this backgauge can be easily retrofitted onto older machines if you are looking for an upgrade. -
Upgrade from 1.5 hp to 5 hp (increases calculated speed to: extend 55.8ipm [no load], retract 74.4ipm)
-
75º Gooseneck punch Configurable in .25" increments from 1" to 53.5" 1", 1.25", 1.5", 1.75", 2", 3", 4", 5", 12", and 18" Lengths Included
-
- 60° gooseneck punch (5.75" net height, R.094" tip) with a 62° single-V die (7/8" opening, 1.75" net height)
- (1) 53.5" segmented set, configurable in 0.25" increments
- American style safety tang
-
This innovative add-on allows you to slide the cylinder side to side on your press. It uses a hydraulic cylinder with a valve control Travel: 24" Note: The product pictured is the 48" wide model
-
72" of 4W2E 4-way die with die openings .625" @90deg, .875" @85deg, 1.25" @85deg, 2" @85deg. This die has a 2.36" (60mm) block and is designed for the 2.36" bolt on die holder.
-
72" of 4W5 with die openings of 1", 1.5", 2", 3". This die has a 3.75" block and is made to fit the 3.75" wide bolt on die holder.
-
2.36″ (60mm) bolt on die holder with American tang slot. Measurement is front to back width.
-
3.75" bolt on die holder with American tang slot. Measurement is front to back width.
-
72" Powered Backgauge for Manual Control.
This backgauge has it's own basic touchscreen control that operates independantly from the press brake control.Simple to use.
Enter the desired position and the backgauge moves to that position under power and remains there until a new position has been entered. May be installed on machines with a Manual Control or CNC Control. Additionally, this backgauge can be easily retrofitted onto older machines if you are looking for an upgrade. -
75º Gooseneck punch Configurable in .25" increments from 1" to 77.5" 1", 1.25", 1.5", 1.75", 2", 3", 4", 5", 12", 18", and 24" Lengths Included *Pictures show 53.5" set
-
- 60° gooseneck punch (5.75" net height, R.094" tip) with a 62° single-V die (7/8" opening, 1.75" net height)
- (1) 24" lengths and a(1) 53.5" segmented set, configurable in 0.25" increments
- American style safety tang
- Meant for use with our B72/100 Press Brake
-
96" of 4W2E 4-way die with die openings .625" @90deg, .875" @85deg, 1.25" @85deg, 2" @85deg. This die has a 2.36" (60mm) block and is designed for the 2.36" bolt on die holder.
-
96" of 4W5-3.75 with die openings of 1", 1.5", 2", 3". This die has a 3.75" block and is made to fit the 3.75" wide bolt on die holder.
-
2.36″ (60mm) bolt on die holder with American tang slot. Measurement is front to back width.
-
3.75" bolt on die holder with American tang slot. Measurement is front to back width.




























